Armory Sponsor
Posted: 3/9/2009 5:44:45 PM EDT
| I tried to disassenble my STG-556 today and need some help. I cannot get the receiver to come aprt from the stock. I got the butt cap off and the barrel out but no matter what I try, I cannot get the reciever to come out of the stock. The manual makes it seem simple but is there something that I am missing? |
|
I struggled at first too, is the trigger pulled (decocked so to speak) and the safety on (white dot showing)?? And then it takes a good tug to pull the receiver from the stock set when its new. As the manual states: point the barrel down and pull the stock back and away.
HTH, |
|
Quoted:
I tried to disassenble my STG-556 today and need some help. I cannot get the receiver to come aprt from the stock. I got the butt cap off and the barrel out but no matter what I try, I cannot get the reciever to come out of the stock. The manual makes it seem simple but is there something that I am missing? Are you moving the takedown latch before trying to remove the receiver from the stock? It can be pretty tight the first few times. To make it easier I place the STG muzzle-down onto carpet then press down on the buttpad to relieve pressure on the takedown latch before trying to move it. HTH, keep us posted!... Tomac |
Armory Sponsor