Armory Sponsor
Posted: Today 1:34:23 PM EDT
[Last Edit: vagrenadeer][Edited]
|
Hello! I'm having a lot of trouble working up a decent load for my psa ar10 (18 inch stainless bbl, gen 2 shooting suppressed). I have a pile of pull down 308 soft points with cannelures that perform well in my bolt guns, and was hoping to get a reliable budget deer load for the ar10. I've tried both wc844 and reloader 15. My jug of wc844 has been loaded using h335 data in other calibers with no issues, albeit a little slower than same charge in h335. I tried mild, medium and 44 grain max loads per Hodgdon (Speer goes as high as 47 gr for h335). Hotter loads seem to group best, but almost everything down to 2300 fps is giving me mild pressure signs on the brass (including cracked necks and divots on the hotter end, shiny swipe marks on middle and lower end). Brass is once fired and fl resized before use, bullets seated to cannelure. I understand hornady brass tends to be softer but seeing swipes on everything but factory PMC. I previously shot this gun only a few times with 2 factory loads- pmc 147 grain fmj (slow stuff 2500 fps in this gun- brass looks good) and steel cased soft points but my reloads are chewing up the brass even down to 2300 fps loads. Does this gun just beat up brass? Anyone else loading for one of these? I'd love to see what your fired brass looks like out of the same gun. Any assistance would be appreciated- I might be worried about this needlessly.  ^ This is what 42 grains reloader 15 (< 2300 fps) and factory steel looks like  ^ 44 grains wc844/h335 2600 fps in 18inch barrel- best grouping out of my trials  ^ 43.5/42/41.5 grains wc844 2600-2500 fps 18 in bbl |
Joined:
Oct 2025
Posts:
1171
EE: 0% (0)
KY, USA
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter