Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
4/28/2013 12:54:11 PM EDT
We found 8 corroded 12 gauge shells when cleaning out My FIL storage unit, I was thinking soak them in water for acouple days, then toss them?
4/28/2013 12:56:51 PM EDT
[#1]
That's what I have done in the past.
4/28/2013 1:36:23 PM EDT
[#2]
Here is what I usually do:  cut the hull open, salvage the shot, and fertilize something with the powder.  YMMV.
4/28/2013 1:44:35 PM EDT
[#3]
how I do it, my goal is to salvage all the components, not make the shell safe



http://www.ar15.com/forums/t_6_42/299960_The_12_Gauge_Shotshell_Reloading_Tutorial___DONE.html&page=1#i2645283
4/28/2013 2:08:05 PM EDT
[#4]
These are so nasty, I don't want none of it, got no use for it either. I just put them in the drink.

Thanks, Dave.
4/28/2013 2:37:46 PM EDT
[#5]
if you're going to soak them, use a box cutter to cut a slit above the base of the shell for the powder to get wet
4/28/2013 3:19:06 PM EDT
[#6]
You also can bring them to a police station for them to dispose of.
4/28/2013 3:25:21 PM EDT
[#7]
They're not UXO cut them open and dump the powder on the ground and toss the rest of it.
4/28/2013 3:36:04 PM EDT
[#8]
I'm gonna soak em, then cut them open, dump the powder goo in the gravel, save the shot, toss the rest. I guess the shot will melt with the wheel wieghts.
4/28/2013 7:54:28 PM EDT
[#9]
No need to soak them first.  Just cut them open with a utility knife right next to the brass.  Roll them across the work bench while pressing down with the knife.  Does not take much.
4/28/2013 10:53:49 PM EDT
[#10]
Quoted:
You also can bring them to a police station for them to dispose of.


Yep, and we just throw them in the trash.
Armory Sponsor