Armory Sponsor
Posted: 2/19/2009 5:24:51 PM EDT
|
Good advice from Sinclair international http://blog.sinclairintl.com/2009/02/19/setting-up-a-full-length-sizing-die/ |
|
check out this post.
Possible answer to most function problems with handloads??? |
|
The OP therein is wrong. You can't assume that any certain die and shellholder will produce proper headspace, unless you MEASURE. |
|
Quoted: Assault Rufler is dead on––Almost all the "my reloaded case won't go easily/at all into my rifle" posts are describing a problem that the case headspace gauge will cure. Not my original material, just a link to Sinclair's. I've been doing and teaching the "feel" method I guess for years except I use a case gage instead of an actual rifle chamber |
|
Quoted: Made a request to add this to the Tutorials see http://www.ar15.com/forums/topic.html?b=6&f=42&t=258520&page=1This is all excellent info thanks for posting edit: have these links made it to the tutorials on the top of the page? I'm sure they would save some others a lot of frustration |
|
Quoted:
Quoted:
Assault Rufler is dead on––Almost all the "my reloaded case won't go easily/at all into my rifle" posts are describing a problem that the case headspace gauge will cure. Not my original material, just a link to Sinclair's. I've been doing and teaching the "feel" method I guess for years except I use a case gage instead of an actual rifle chamber Well said. |
|
Here is the one I use to send people to.
Re-loading Die Adjustments http://www.chuckhawks.com/adjust_reloading_dies.htm Aloha, Mark |
Armory Sponsor