Armory Sponsor
Posted: 8/28/2009 10:52:56 AM EDT
| Will these work on a GSG? |
|
Yes it will, but you will have to mod the claws a little bit in order to catch correctly. The latches where the claws catch are a little bit bigger on the GSG than on the orginal HK, therefore the lever on the mount will not snap in place. You have to grind down the claw sides facing the latch by a hair to have it catch correctly. It only requires about 1mm, so be careful with the grinder.
you have to choose between the "stationary" claws or the "movable" ones. I choose the movable ones since it was easier to disassemble the mount and grind them down. good luck. |
Armory Sponsor