Armory Sponsor
Posted: 2/22/2009 11:41:23 AM EDT
| went to the range with a new gsg5 pistol.uesd different ammo and mags.got a lot of stovepipes with empty cases.seams like it is not extracting all the time.any suggestions. |
|
Two possible problems.
1. Check to see if the extractor is staked in position or if it loose. If it is riveted in go on to step 2. 2. Make sure your barrel is clocked to the breach housing so the extractor groove is lined correctly. If it is not lined correctly turn barrel until it is then make sure you tighten the barrel screw to keep it from rotating. |
| extractor is staked,not loose.used federal good stuff and thunderbolt.did a complete clean and no cracking anywhere or nothing out of normal.my gsg5 rifle ran all day long with same ammo.it was 20 degrees and wind 20 to 25 mph.lots of fun.shot over 300 rds through rifle,150 through pistol. |
Armory Sponsor