Armory Sponsor
Posted: 8/1/2008 3:35:41 PM EDT
Does anyone make a direct screw/bolt on thread adaptor for the GSG-5 PISTOL to take a 1/2x28 threaded suppressor? It " a GSG5 pistol" already has a short barrel it just seems like a no brain-er to have one "a thread adaptor" available that could screw right on......
|
Good idea. GSG should have made the 5P with a shorter barrel so you could unscrew the FH and screw on an adapter. Hindsight is 20/20 |
.
|
Just get a good machinist friend to make you one, that's what I did and works perfect. I don't have the exact mesurements. He just took steel stock and cut a 1/4 inch center hole then opened up for the barrel to fit in. he then turned down the front to 1/2 x 1/2 with 28tpi and threaded the back end for 24tpi. and works great. I'll try to get pics, but no promises, as its been a busy weekend at work, and don't get off until tomorrow, |
Armory Sponsor