Armory Sponsor
Posted: 2/8/2009 3:51:24 PM EDT
|
I just bought a new Cobb carbine. Man, what a BLAST!
But it won't strip a round from the mag without a stopage. Anyone have any advice? |
| Does it happen with a full mag or all the time regardless of number of rounds in the mag? If it's only when it's full there's probably to much tension on the spring and would be better off running one or two less rounds. In a modern mag this shouldn't be an issue and I would check with manufacturer about the problem. |
|
I have a cobb and had the same problem during the break in period. Since then I have not had a problem and the action got smoother as more rounds went down range. I did not make any changes just made sure she remained clean and lubed and it worked itself out.
I know this isn't exactly what you wanted to hear but like any firearm the more you use it the better it gets. Good luck. |
Armory Sponsor