Armory Sponsor
Posted: 12/28/2008 1:43:52 PM EDT
|
What are the chances I could get a decent trigger to work well on a 50 upper, standard 5.56 upper and a .22 conversion for the 5.56 upper?
I am starting to save up for my next project, what it will be has not been decided. |
|
Quoted:
What are the chances I could get a decent trigger to work well on a 50 upper, standard 5.56 upper and a .22 conversion for the 5.56 upper? I am starting to save up for my next project, what it will be has not been decided. I'd bet on a JARD trigger working on all three. You'd have to change hammer springs between each upper. A 50 neads an extra power spring to detonate most primers. A 223 needs a standard spring. A 22 LR needs a light one or it won't cycle. The JARD, Inc kit can be had with a heavy hammer which I have had great reasults in a 50 BMG. I'm sure the heavy hammer would work fine in a 223. Might be a little much for rimfire. But swapping a hammer and spring shouldn't be too much hassle. Other guys are using RRA 2-stage triggers for 50's and 223. They definitely need a heavy spring for a 50. -David Edgewood, NM |
Armory Sponsor