Armory Sponsor
Posted: 7/4/2013 8:33:54 AM EDT
|
I want to remove the PWS comp and replace it with an A2 (for now), for thiose that have replaced the OEM comp, is the procedure as simple as placing the upper in a vice and tightening it at the rails at 3 and 9 o'clock?
|
|
Quoted:
I want to remove the PWS comp and replace it with an A2 (for now), for thiose that have replaced the OEM comp, is the procedure as simple as placing the upper in a vice and tightening it at the rails at 3 and 9 o'clock? I just stuck it between my legs and wrench down on it, with a vice it should be a breeze. 
|
|
Quoted:
Thanks - your right it came off pretty easily. I wrapped the upper in a blanket and had someone hold it, and it come off. Funny can't seem index the A2 nicely. Any tricks? flipping the washer either way always has off center... I'm not sure on that one, I'm pretty sure mine torqued on center without issue... |
|
Quoted:
Was curious...for those that have replaced the comp on the 17S for a regular flash hider...what's the recoil and muzzle flip like with just the flash hider? Recoil is still minimal. The change in CG from the bolt carrier moving moves the rifle more than the recoil. H |
Armory Sponsor