Armory Sponsor
Posted: 4/2/2016 5:36:34 PM EDT
|
I have a Huntertown Guardian 9 pistol carbine suppressor that I use on an M&P 9 pistol with a booster and on a Beretta CX4 Storm carbine with direct thread without the booster. All was fine until I disassembled the suppressor and cleaned it. Now when used on my pistol or the carbine it shoots 2 ft to the left at 25 yards and 4 to 5 ft left at 50 yds. Wiithout the suppressor both guns shoot fine and are very accurate. I have taken the suppressor apart several times and checked all the baffles and cannot see any baffle strikes. I've made sure the baffles are in the correct order and direction, short one last away from barrel. I've made sure they are NOT stacked where all the cutouts line up. Still shooting 4 or 5 ft to the left and about 1 ft low at 50 yds on the Beretta carbine. Without the suppressor I can hit with 2 inches of bullseye at 50 yds with the open sights.
What the hell is wrong! Help! |
Armory Sponsor