Armory Sponsor
Posted: 8/22/2008 1:23:29 PM EDT
| I came here looking for tech help regarding a suppressor. I have several AR's, a Bushy M4, a Colt 6920, a SPR from MSTN, a 20 inch rifle and a 7.5 inch barreled SBR. I want a single can I can use on as many of these rifles as possible. Does such a thing exist. I was thinking about OPS Inc 12th model, but not sure if it would be ok foe the SBR, tho I think all others would be ok. Thanks |
|
Just about any will work as long as they don't extend too far back over the barrel on the SBR, that will be the limiting factor. If it fits the SBR it will fit the rest. On the brands you've been looking at just look at the specs and it should tell you how far back the can extends past the mount (to the rear) Then look at your SBR and see if you have that much clearence between the gas block or front sight post (if you have one) and the point where the muzzle threads start. If I remember correctly the OPS can extends back a little bit so that may not sork on the SBR. |
|
the ops 14th 15th and 16th models all share the same mounting system...the 12th is different, it's a bigger can...check this out. 14th model from what i understand, it's not as quiet. but it's shorter and a little lighter. (and there's a pic of one on a 7.5 barrel) SIDE NOTE: I do not have an ops inc can, as i am only 20, but next year i'm getting a 12th model. |
Armory Sponsor