Armory Sponsor
Posted: 3/7/2010 6:54:58 PM EDT
I just bought a VZ-58 this weekend and I took it to the range this morning and fired 30rds through it and then took the rifle apart to inspect the innards of the action and noticed a c-clip laying in the bottom of the reciever.. I looked at all the pins and everywhere that it possibly could have come from and nothing is missing??? All the pins are tight and I couldn't get any of them to push out the sides the trigger pin on the right side looks like it might have possibly intended to have one, but this clip I found is too big for that pin anyway.. I am stumped.. I function tested it and everything works as it should and I said the hell with it and fired another magazine through it and it works great, so what the hell is up with that???
 
|
|
Quoted:
Just field stripped mine down to check... Both the trigger & disconnect pins are supposed to have a C clip. The right side of the trigger pin? If so then mine doesn't have one.  The c clip is way too big for it I tried to put it there.. I guess I'll have to track down a proper size clip...
|
|
Quoted:
Quoted:
Just field stripped mine down to check... Both the trigger & disconnect pins are supposed to have a C clip. The right side of the trigger pin? If so then mine doesn't have one. The c clip is way too big for it I tried to put it there.. I guess I'll have to track down a proper size clip...Yes What type of Vz58 is it? Cz-USA/D-Technik, OOW, Century...? Sounds like somebody screwed up & used a wrong sized C clip on the trigger pin of your rifle...either at the factory or some goober salesman at the gunshop was fingerfvcking it, lost the clip & substituted one he had handy, hoping nobody would notice. |
Armory Sponsor