[ARCHIVED THREAD] - Winchester Model 77 disassembly

Posted: 2/4/2008 1:17:09 PM EDT

Howdy everybody. I must be a moron, because I'm having trouble taking down my model 77 .22. I removed the two screws that I can see, but there aren't any pins or levers for taking it down. What am I missing?
The stock is ruined and is going to be replaced.

Thanks.

Damon

Posted: 2/5/2008 10:13:18 AM EDT

[#1]

Bump... I realize this isn't the most common rifle but somebodies got to have one.

Posted: 2/5/2008 12:03:11 PM EDT

[#2]

If nobody is able to help you:

www.rayrilingarmsbooks.com/cgi-bin/rrb455.cgi/7122.html?id=BhDfHn9L

Posted: 2/5/2008 4:08:16 PM EDT

[#3]

I am pretty sure the action is just slid into the stock. The action assembly is press fit together so there's no taking that apart, but you should be able to just slide the whole assembly out of the stock.

I'll do some more research and check back.

Mike

Posted: 2/5/2008 4:20:55 PM EDT

[#4]

Check with the guys at Rimfirecentral.com and they can help.

Here's at least one thread on the 77:

www.rimfirecentral.com/forums/showthread.php?t=164692&highlight=winchester+model+77

Posted: 2/6/2008 2:21:02 PM EDT

[#5]

Thanks a lot Mike! that link is exactly what I was looking for.

[ARCHIVED THREAD] - Winchester Model 77 disassembly

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Winchester Model 77 disassembly

[ARCHIVED THREAD] - Winchester Model 77 disassembly