[ARCHIVED THREAD] - Liquid Blue?

Posted: 5/27/2016 1:26:21 PM EDT

I have a Yugo M92 pistol with a protective cover over its 26mm threads that is tack welded in place. After I remove the tack weld via dremel cut off wheel and sanding disk, will liquid blue do a good job at hiding the area that was affected?

It's a small tack weld and a little sanding will need to happen to smooth out the surface. Or is there a better alternative to touch up small areas? The metal is dark/black in color on this AK pistol.

Posted: 5/27/2016 4:12:06 PM EDT

[#1]

spray some Walmart rattle can flat black paint onto a plate and touch it up with a detail brush

Posted: 5/28/2016 11:51:00 PM EDT

[#2]

Brownells "oxpho blue" is what you seek........

Posted: 5/29/2016 9:48:01 AM EDT

[#3]

if the finish is dark black i would use a touch up pen or like mentioned hit up advanced auto for some black ceramic paint and spray it into the cap and dab some on using a fine brush , using a blueing like oxpho may help to hide but wont match.

Posted: 5/29/2016 10:41:38 AM EDT

[#4]

Actually ......oxpho-blue is just about a 100% match for the bluing on Yugo guns.....

your call.....your gun.....

Posted: 6/1/2016 2:26:10 PM EDT

[#5]

When I cut mine off I used Birchwood Casey Super Blue to touch it up and you'd never know anything was ever done to it.

Posted: 6/1/2016 2:56:41 PM EDT

[#6]

Quote History

Quoted:
Brownells "oxpho blue" is what you seek........

View Quote

THIS. Stuff is amazing.

[ARCHIVED THREAD] - Liquid Blue?

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Liquid Blue?

[ARCHIVED THREAD] - Liquid Blue?