Armory Sponsor
Posted: 5/19/2013 3:22:18 PM EDT
|
Finally found a Tactical solutions .920 matte black threaded barrel for my 10/22.
Now for the stock... |
|
Quoted:
Quoted:
What stock are you looking at? I have a green/black laminate on it now, thinking about having it channeled to fit the TacSol barrel. Or I might get a houge over molded. If you get the Hogue, whittle yourself a little plastic wedge to sit on top of the trigger tail and keep the rear of the receiver down, it helps the barrel stay floating, even on a bipod. Also, unless your receiver is sloppy, the TacSol barrel will be a ...snug fit. You might have to do a little sanding on the OD of the breech end. This is a good thing, but it can be tedious to get it just right. 
|
|
Quoted:
Quoted:
Quoted:
What stock are you looking at? I have a green/black laminate on it now, thinking about having it channeled to fit the TacSol barrel. Or I might get a houge over molded. If you get the Hogue, whittle yourself a little plastic wedge to sit on top of the trigger tail and keep the rear of the receiver down, it helps the barrel stay floating, even on a bipod. Also, unless your receiver is sloppy, the TacSol barrel will be a ...snug fit. You might have to do a little sanding on the OD of the breech end. This is a good thing, but it can be tedious to get it just right. <a href="http://s241.photobucket.com/user/devtucker/media/2011-11-22_19-39-05_127.jpg.html" target="_blank">http://i241.photobucket.com/albums/ff206/devtucker/2011-11-22_19-39-05_127.jpg</a> Nice.... 
|
Armory Sponsor