Armory Sponsor
Posted: 8/29/2006 3:12:03 PM EDT
| So I thought it might have been my stock. Well, my 50yrd target looks pretty shabby. 3 inchs. I know that its not me b.c. I use other 10/22s and get a great group. I think my stock might be causing it. Hogue stock. TAC SOL barrel, and everything else is stock. (other than the hammer-VOLQ) Any ideas?? When I put light pressure on the stock the point of impact changes. |
Where is the problem with the Hogue stock? From Clark Custom Guns: Clark 1 MOA accuracy guarantee for 5 shots with approved stock: The Hogue stock is approved! It really can’t be so bad …  |
So what else should I check???? What could the problem be? I know its not me b.c. I shoot my wifes 10/22 and get .5 at 50 PLEASE HELP!!!! |
|
I have a different kinf of 10/22 problem. Is it kewl if I ask? It jams every 10th or so shot. The shells are getting caught between the bolt and the receiver. Basically a failure to eject. Iv'e bought new mags, totally dissassembled and cleaned. What now? Extractor? |
"accuracy guaruntees" are not worth the paper they are written on. To the OP: Check your mounts, make sure nothings loose. Re-install all bases, rings, v-block bolts, ect with blue loctite. Try swapping your scope to another rifle and see what happens. Maybe you have a wandering zero. Try swapping barrels to another rifle, ect. Check any bolts, mounts, ect before you do anything. |
will do, thanks. |
|
Several different ones. American, Federal, Remington. |
Armory Sponsor