Armory Sponsor
Posted: 8/19/2017 8:58:14 PM EDT
|
Just picked up a Ops Core Bump helmet and was thinking about adding hearing protection to it.
Was thinking about picking these up since there on sale, If I got those earmuffs what ARC rail adapter would I need? Also is those earmuffs good for the price? |
|
Lol, are the ComTacs good...
Yes. The ComTac III is used heavily by U.S. special forces units and other analogous units in foreign militaries as well as police departments that can afford such a luxury. They're the best you can buy for under a grand. They're pretty much as good as it gets and $300 isn't a bad price for them. I'm pretty sure all you need is the rail adapter. What mounting system does the helmet come with, if any? If it doesn't have the rail on it you'll have to add it yourself. |
|
Quoted:
Lol, are the ComTacs good... Yes. The ComTac III is used heavily by U.S. special forces units and other analogous units in foreign militaries as well as police departments that can afford such a luxury. They're the best you can buy for under a grand. They're pretty much as good as it gets and $300 isn't a bad price for them. I'm pretty sure all you need is the rail adapter. What mounting system does the helmet come with, if any? If it doesn't have the rail on it you'll have to add it yourself. I don't have the helmet yet, I just bought it so I don't know lol I got it off Ebay brand new and it's the same as the site. |
|
Quoted:
Helmet I don't have the helmet yet, I just bought it so I don't know lol I got it off Ebay brand new and it's the same as the site. |
|
Quoted:
Oh yeah, it's got Ops-Cores rail system on it so you should be good to go with the proper rail adapter. I think. I've never mounted earpro like that but I know a bunch of people here do. Someone should come along eventually who can confirm/correct my statements on the mounting hardware... 
|
|
Quoted:
Which adapter? Quoted:
Quoted:
Oh yeah, it's got Ops-Cores rail system on it so you should be good to go with the proper rail adapter. I think. I've never mounted earpro like that but I know a bunch of people here do. Someone should come along eventually who can confirm/correct my statements on the mounting hardware... I'm pretty sure that adapter is all you need once you've got the muffs and helmet. |
|
Quoted:
If I get a pair of those Comtac's can I set them up for comms down the road when I get into them? I read that you can and others say you can't? From my understanding ComTacs have a proprietary 2 pin downlead plug for plugging in cables. They make 2 pin cables that adapt to stuff like 3.5mm jacks. I know there's "dedicated" comms models that have certain downleads either permanently fixed to the headset or they just come with them, those are the $500+ models you see. For some reason I had a hard time finding a straight answer on this myself when I was looking for electronic earpro. If you want to know for 100% certain I'd contact Peltor and ask them. Have the exact model ID ready. |
|
Quoted:
If I get a pair of those Comtac's can I set them up for comms down the road when I get into them? I read that you can and others say you can't? https://srstactical.com/y-cable-harness-assembly.html and https://srstactical.com/all-products/communication-headsets-and-kits/accessories-leads-and-adaptors/flexi-boom-microphone.html and A PTT for your radio that accepts a TP120 plug wired to the same pin-out config as the Y-cable you use. |
|
Quoted:
You can, you'll need the following IIRC: https://srstactical.com/y-cable-harness-assembly.html and https://srstactical.com/all-products/communication-headsets-and-kits/accessories-leads-and-adaptors/flexi-boom-microphone.html and A PTT for your radio that accepts a TP120 plug wired to the same pin-out config as the Y-cable you use. I just placed my order for a pair Foliage Green Comtac III 
I'm glad I did, The black pair I was thinking about getting went up $25 
I will see how they work for me and when the time comes for comms I'll set them up. Thanks guys! Will try to post pics when everything gets here 
|
|
Quoted:
Which adapter? Honestly tho, fitting them to the helmet is a semi destructive process Once you do it, the headband is pretty much ruined. It looks like this in the end Attached File They work great, but know that you can achieve similar results by running the headband under the suspension harness and keeping the headband in tact. This is a less solid fit, but still works and leaves your (expensive) headset intact for standalone use. The only difference between that $300 version and the $550 version is the lack of a boom mic. If you aren't running a military style radio it will be a moot point as it's just an extra cable and mic hanging off your shit |
|
Quoted:
the Arc Rail Adapter. 3M makes one, Honestly tho, fitting them to the helmet is a semi destructive process Once you do it, the headband is pretty much ruined. It looks like this in the end https://www.AR15.Com/media/mediaFiles/427499/IMG_1937-287084.JPG They work great, but know that you can achieve similar results by running the headband under the suspension harness and keeping the headband in tact. This is a less solid fit, but still works and leaves your (expensive) headset intact for standalone use. The only difference between that $300 version and the $550 version is the lack of a boom mic. If you aren't running a military style radio it will be a moot point as it's just an extra cable and mic hanging off your shit what light is that? |
|
Thanks!
Light is a Princeton Tec Switch MPLS (ARC Rail adapter sold separately) http://princetontec.com/switch-mpls So kicking this around, there is a wire that connects the two earcups that is encased by the leather headband (I wish I'd taken pics of the transformation). You have to cut the leather off to get to the wire in order to mount the headphones to the Arc rail. Then you can pull the earcups off the wires holiding them in place and transfer them to the ARC rail adapter. If you do have to cut, cut the actual threads in the stitches on the headband and leave the leather intact. Then you can either see it back together later, or maybe see some Velcro in it so it is a removable feature. As mentioned before, in the OpsCore manual that came with your helmet, it might have a diagram showing how to install the headset with the headband still attached. I found that to be really uncomfortable but your experience may vary. Note with the light: I had to set my headphones pretty far back on the rail in order to securely fit the light on. I also have it mounted backwards on the adapter so the tab is accessible from the front. Play around and problem solve till you get a solution that works for you. Ain't anyone else wearing that helmet |
|
Quoted:
Thanks! Light is a Princeton Tec Switch MPLS (ARC Rail adapter sold separately) http://princetontec.com/switch-mpls So kicking this around, there is a wire that connects the two earcups that is encased by the leather headband (I wish I'd taken pics of the transformation). You have to cut the leather off to get to the wire in order to mount the headphones to the Arc rail. Then you can pull the earcups off the wires holiding them in place and transfer them to the ARC rail adapter. If you do have to cut, cut the actual threads in the stitches on the headband and leave the leather intact. Then you can either see it back together later, or maybe see some Velcro in it so it is a removable feature. As mentioned before, in the OpsCore manual that came with your helmet, it might have a diagram showing how to install the headset with the headband still attached. I found that to be really uncomfortable but your experience may vary. Note with the light: I had to set my headphones pretty far back on the rail in order to securely fit the light on. I also have it mounted backwards on the adapter so the tab is accessible from the front. Play around and problem solve till you get a solution that works for you. Ain't anyone else wearing that helmet 3M vs MARK 
|
|
Quoted:
You can, you'll need the following IIRC: https://srstactical.com/y-cable-harness-assembly.html and https://srstactical.com/all-products/communication-headsets-and-kits/accessories-leads-and-adaptors/flexi-boom-microphone.html and A PTT for your radio that accepts a TP120 plug wired to the same pin-out config as the Y-cable you use. Alternatively, get an in the ear set up and run it under the headset. |
|
Quoted:
the Arc Rail Adapter. 3M makes one, Honestly tho, fitting them to the helmet is a semi destructive process Once you do it, the headband is pretty much ruined. It looks like this in the end https://www.AR15.Com/media/mediaFiles/427499/IMG_1937-287084.JPG They work great, but know that you can achieve similar results by running the headband under the suspension harness and keeping the headband in tact. This is a less solid fit, but still works and leaves your (expensive) headset intact for standalone use. The only difference between that $300 version and the $550 version is the lack of a boom mic. If you aren't running a military style radio it will be a moot point as it's just an extra cable and mic hanging off your shit There are electronic differences in the headset, which is why you have a milspec downlead that won't break or pop out. The aftermarket kit to put the electronics outside from SRS is NOT as robust. It's a huge hunk of crap and I'm pissed I ever bought it. But as I stated above, the boom mic is not the answer, the shoulder mic and 3.5mm plug is. |
Armory Sponsor