Armory Sponsor
Posted: 1/1/2013 1:25:44 PM EDT
|
It might be something that would need to be custom made, but I thought I'd ask. Ideally I'd like a shingle for attaching to my plate carrier that is one-piece and includes a med pouch, three mag pouches, a flashlight pouch, and a multitool pouch. I know that sounds like a lot, however, I was looking at changing my setup using an hsgi bleeder on the right, a double mag pouch in the middle, and a single mag shingle on the left with a flashlight and multitool pouch attached to the front.
It's not an issue to buy the components, but obviously I could save a little bulk and weight if it was made as one unit. Does anyone make such a thing as a regularly stocked item or is it going to be custom? |
|
Quoted:
It might be something that would need to be custom made, but I thought I'd ask. Ideally I'd like a shingle for attaching to my plate carrier that is one-piece and includes a med pouch, three mag pouches, a flashlight pouch, and a multitool pouch. I know that sounds like a lot, however, I was looking at changing my setup using an hsgi bleeder on the right, a double mag pouch in the middle, and a single mag shingle on the left with a flashlight and multitool pouch attached to the front. It's not an issue to buy the components, but obviously I could save a little bulk and weight if it was made as one unit. Does anyone make such a thing as a regularly stocked item or is it going to be custom? Its going to be a custom job. At least to cut down the bulk. I would suggest using a triple rifle shingle, with the bleeder on the right as worn and utilize helium whisper for the light and multitool as well as pistol mags. |
|
Thanks for the responses guys. Right now I have a triple mag shingle behind a med pouch next to a flashlight pouch. I run a dual pistol mag pouch on the weak side at the ten o' clock position. Apart from the pistol mags I prefer to have everything on the front for easier vehicle exits, not to mention comfort.
The med pouches are typically the bulkiest items for me so I'm looking at changing it up so I can streamline the size of the load out, which is fairly minimal in the first place. If I do a med pouch directly on the carrier on the right, the dual mag pouch in the center (which can double as a radio pouch), and the single shingle on the far left, then put the flashlight pouch on front of the single shingle, I should be able to even out the load fairly well. I asked about the multitool pouch since I'd have a slot on front of the single shingle open and I've been meaning to add provisions for one. I guess I will piece it together for the time being. I think the marz gear setup is nice but not quite what I am looking for. Here's what I'll be running: -GGG carrier -HSGI bleeder -Emdom double rifle mag pouch -TT single shingle -SOE flashlight pouch -BDS double pistol mag pouch Not sure what pouch would work well for my multitool (Multitasker)....thinking that the HSGI strobe pouch will work well for this. Any suggestions on that front? |
Armory Sponsor