[ARCHIVED THREAD] - Eagle PC Lg/XL with Large Plates....Problem

Posted: 7/21/2011 1:21:41 PM EDT

Ok guys I have a Lg/XL Eagle PC that I have the soft armor backers in. I have an XL set of lvl III icw ceramic plates that fit perfect. I also have a set of Large Ti stand alone plates that swim quite a bit in the PC.

I personally perfer the Ti plates because they are quite a bit thinner and alot loess bulky, but I don't like the fact they swim around a bit in the PC. I obviously want them to stay in their proper place to afford the protection they are designed for.

Is there an easy solution to keeping the Large plates in place.

Posted: 7/21/2011 2:35:03 PM EDT

[#1]

tag, i've got this issue too.. are they the Ti plates from DSG?

Posted: 7/21/2011 2:36:53 PM EDT

[#2]

Yeah.

Posted: 7/22/2011 12:33:40 PM EDT

[#3]

Dual sided adhesive velcro : The widest you can find. Put 4 strips on the back of the plates horizontal. I did that with a set of Paca's I used to have in my Eagle that kept shifting.

Posted: 7/22/2011 2:41:50 PM EDT

[#4]

you can use some stiff foam to keep it in there tight

Posted: 8/13/2011 4:55:11 AM EDT

[#5]

I had this problem in the older Safariland vests. I took a foam ISO mat and cut strips and duct taped them to the edges to fill the gaps and keep it in place. I tried velcro at first but it started to peel the surface of the plate away.

[ARCHIVED THREAD] - Eagle PC Lg/XL with Large Plates....Problem

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Eagle PC Lg/XL with Large Plates....Problem

[ARCHIVED THREAD] - Eagle PC Lg/XL with Large Plates....Problem