Armory Sponsor
Posted: 7/15/2009 3:38:28 PM EDT
| where can i find a bead tap? |
|
What size do you need?
Some common guns and their factory bead thead sizes 3-56 & 6-48 are the most common sizes used for replacement beads.. Any of these can be found at Brownells, Midway, or your local gunsmith. |
|
Quoted:
What size do you need? 3-56, 5-40, 6-48 are the most common sizes. Any of these can be found at Brownells, Midway, or your local gunsmith. or use-enco.com, mcmastercarr.com, penntoolco.com, etc., probably cheaper than any of the above sources. OP, be careful with those small taps. Use plenty of oil and back them out often to break and clear chips. |
Armory Sponsor