Posted: 12/11/2009 9:43:49 PM EDT
Just finished. Matching serial number Commander pics will follow.
Colt .38 Super/ 9 mm specs Early Colt small letter .38 super Tightened slide to frame fit lower ejection port flatten and serrate top of slide Heinie Slant pro sights bevel bottom of slide polish breechface install, polish and tune EGW HD extractor Barstock firing pin Hone slide bore Install and fit(2) Jarvis match grade stainless barrels(.38 super/9mm) Install and fit SS Thick flange bushing and matching plug crown and polish muzzle to flush match plug Hand chamber throat and polish for ultimate reliability serrate rear of slide to match sight Square trigger gaurd Ed Brown beavertail Ed Brown thumb safety Legacy magwell/mainspring housing hex grip screws and matching mag release catch tactical mag catch(slightly longer) Barstock pinset Barstock ejector Tool steel sear,disconnector Titanium hammer strut and mainspring cap ISMI springs Solid trigger with internal stop Checker Frontstrap at 25 lpi w/High grip Checker mainspring housing to match Clean up and straighten frame and slide lines and contours Blend front sight to slide 600 grit polish and blue #3 lb trigger pull 2 .38 super mags 1 9mm mag Chuck Warner [email protected] |
And its little brother.....
Colt/Caspian SS/Blue Commander specs Early Colt small letter .38 super slide Tightened slide to frame fit lower ejection port flatten and serrate top of slide Heinie Slant pro sights(Straight Eight Tritium bevel bottom of slide polish breechface install, polish and tune EGW HD extractor Barstock firing pin Hone slide bore Install and fit(2) Jarvis match grade stainless barrels(.38 super/9mm) Install and fit SS Thick flange bushing and matching plug crown and polish muzzle to flush match plug Hand chamber throat and polish for ultimate reliability checker(40 lpi) rear of slide Square trigger gaurd Ed Brown beavertail Ed Brown thumb safety Heinie magwell barstock mainspring housing round butt hex grip screws tactical mag catch(slightly longer) Barstock pinset Barstock ejector Tool steel sear,disconnector,hammer Titanium hammer strut and mainspring cap ISMI springs Solid trigger with internal stop Checker Frontstrap at 20/ 25 lpi w/High grip Checker mainspring housing to match Clean up and straighten frame and slide lines and contours Blend front sight to slide Integral plunger tube 600 grit polish and blue #3 lb trigger pull .....Both have 9mm conversions as well Chuck W |
|
Quoted:
Does the smaller size of .38 Super equal an extra round or two in the magazine? I've never seen or handled one, serious question. Yes The Commander uses the same magazines as the Government model...so I use 10 rounders with one up the pipe Thanks for the compliments Chuck W |
