Posted: 11/6/2014 11:44:15 AM EDT
|
I have a Para SF-45-A with the ambi safety. The problem that I am having with it is that when I disengage the safety on the right side (i.e left handed) it does not disengage the safety on the left side of the frame. If I disengage the safety on the left side (i.e. right handed) it will disengage both sides of the safety. I have two questions 1)Is there a better ambi safety than what came with the gun? 2)Can I switch to a normal safety lever without any issues?
Gun details: Para SF-45-A, double stack, 14 rd magazines. And because a help thread is worthless without pics: 
|
|
Saftey only enguages on L/H Side (slide stop side).
I would pull the saftey and check the fit of the fork in the middle and Check R/h had for binding in grip area. I am thinking that your fork needs some GENTLE tension added to clamp down on the R/H part. Other Option Purchase a Kings style (kimber and Wilson make copies) and have it fitted. IMHOP the Kings style is a better ambi design. This would need to be fitted. eta bottom pick your saftey should not be sticking out like that on the L/H side. It shall sit flush against the frame. 2nd eta Any aftermarket saftey you add will need to be fitted. ambi or other. |
|
Quoted:
Can't tell too well but it looks like they are both not flush Quoted:
Quoted:
bottom pick your saftey should not be sticking out like that on the L/H side. It shall sit flush against the frame. Can't tell too well but it looks like they are both not flush correct. push them together bet the safety works again. |
|
Quoted:
correct. push them together bet the safety works again. Quoted:
Quoted:
Quoted:
bottom pick your saftey should not be sticking out like that on the L/H side. It shall sit flush against the frame. Can't tell too well but it looks like they are both not flush correct. push them together bet the safety works again. Can I just push them together without disassembling the gun, or is this going to require a break-down |
|
Quoted:
Can I just push them together without disassembling the gun, or is this going to require a break-down Quoted:
Quoted:
Quoted:
Quoted:
bottom pick your saftey should not be sticking out like that on the L/H side. It shall sit flush against the frame. Can't tell too well but it looks like they are both not flush correct. push them together bet the safety works again. Can I just push them together without disassembling the gun, or is this going to require a break-down yes you can, but I am guessing it will just come apart again in a short amount of time. 
you can see the fork that would need some loven. |