picture thread (Page 3 of 3)
|
This is my well worn and always trusted EDC extension of my right (or left, or both) hand(s).
She was built one piece at a time with a Para Ordnance P14 alloy frame, stainless slide, Trijicon adjustable night sights, Insight WX-150 light on a crappy CAA "bolt-on" rail that I ended up having to drill and tap to put 2 allen bolts into each side of the frame's dust cover to get it to stay in place...which prevents it from fitting in almost any holster, but after all is said and done I actually love her this way. She is fitted with a Wilson 18.5 lb recoil spring, and has an old AMT hardballer stainless extended slide stop and non-ambidextrous extended thumb safety, a stainless Gun Craft checkered mag release, an Ed Brown beavertail, a skeletonized grooved trigger with an beveled edges and an over travel adjustment screw, a Pachmayr curved rubberized mainspring housing, a Hogue rubber wraparound monogrip, and she is fed with Para factory 15rd magazines that have been upgraded to Wolff +10% magazine springs. Up next will be a green laser and a Bar-Sto extended & threaded barrel. 
|
Super Hawg 6" long slide with upgrades, including: a 4 lb trigger job with a Wilson tool steel hammer and sear, a fitted Wilson barrel bushing, a Wilson extended slide stop, and Navidrex cocobolo grip panels. She's a looker, but not a safe queen, and she drives tacks...probably better than I do these days.
|
I likes mine with mustard. - JB
|
Originally Posted By fastmover:
my favorite handgun: http://i265.photobucket.com/albums/ii223/fastmover_01/parabighawg.jpg Let me know if you ever decide to sell her. 
And it's a picture thread, so...here are some pictures of my wife's P-14 .45acp. 
|
"They also said artificial sweeteners were safe, WMDs were in Iraq, and Anna Nicole married for love." - Mr. Rate
|
Originally Posted By brotherzoo:
This is my well worn and always trusted EDC extension of my right (or left, or both) hand(s). She was built one piece at a time with a Para Ordnance P14 alloy frame, stainless slide, Trijicon adjustable night sights, Insight WX-150 light on a crappy CAA "bolt-on" rail that I ended up having to drill and tap to put 2 allen bolts into each side of the frame's dust cover to get it to stay in place...which prevents it from fitting in almost any holster, but after all is said and done I actually love her this way. She is fitted with a Wilson 18.5 lb recoil spring, and has an old AMT hardballer stainless extended slide stop and non-ambidextrous extended thumb safety, a stainless Gun Craft serrated mag release, an Ed Brown beavertail, a skeletonized grooved trigger with beveled edges and an over travel adjustment screw, a Pachmayr curved rubberized mainspring housing, a Hogue rubber wraparound monogrip, and she is fed with Para factory 15rd magazines that have been upgraded to Wolff +10% magazine springs. Up next will be a green laser and a Bar-Sto extended & threaded barrel. http://imageshack.us/a/img823/6591/glh5.jpg http://imageshack.us/a/img689/1993/ju9s.jpg Updated pictures of my EDC P-14 .45acp, with Bar-Sto Extended/Threaded barrel for my Silencerco Osprey, and a TruGlo Tru-Point Green Laser/LED Light combo unit added. I also recently added Dawson Precision extended baseplates to some of my mags. 
|
"They also said artificial sweeteners were safe, WMDs were in Iraq, and Anna Nicole married for love." - Mr. Rate
Because Arfcom doesn;t like imgur it seems. Picked her up today. Came with the factory ten rounder and a mec-gar 38super 16-round mag. I'll have to see how well it feeds 9, but I might do a bit of *mild* working to shallow the feed ramp a bit seeing as the 9mm/38su mags are the only ones available. The TLR6 Kimber Micro Housing fits for the most part, but the trigger guard is a bit too fat for it to fit cleanly, so that will need some treatment with a thin tip and a dremel tool. |
|
Picked up a 16-40 Limited a couple days back. Its serial number says manufacture of 2011. It was completely factory with little use. A local smith reduced the 6# trigger to under 4#, put in a better fitting bushing and put in the series 80 to 70 shim. Now to find some good mags and extensions.
Attached File |
|
Updated with Dawson magwell, Dawson extensions and Arredondo springs.
Attached File |
|
Originally Posted By TwerkTeam:
Para-USA Lite hawg (Warthog) with EG HD Extractor http://i1318.photobucket.com/albums/t649/chasechasextwo/IMG_20150111_095358027_zps66dndj47.jpg With P14 MAG and A&G grip extension http://i1318.photobucket.com/albums/t649/chasechasextwo/IMG_20160202_073542133_zpswzgnudnb.jpg |
|
The smaller one is my P12 wile the larger one is a Springfield, which I have heard is a copy of a P14 and uses P14 mags...
Attached File |
Scientific studies have shown the only reason I exist is to provide an inflated sense of superiority to so-called "tolerant" leftist who hate me because I am different from them.
|
This is my kit framed P-14, an early one, I'm told.
Caspian slide, Colt barrel and Wilson parts. Attached File |
I used to be a people person but people fucked that up, too.
FREE SYLVAN
FREE SYLVAN
|
I love this .45... Attached File |
I tried that whole cancer thing. It wasn't for me. Good Riddance.