Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
9/25/2009 6:41:22 PM EDT
I'm looking for something very specific.  I want:

*9mm.

*Stainless steel slide and frame.

*Either: Manual thumb safety that sweeps down to the fire position, or no manual safety.  

So far I've identified the pistols below.  Have I missed any?  

Kahr T9

Sig Sauer P229 Stainless Elite

CZ75b Stainless

9/25/2009 6:52:55 PM EDT
[#1]
Why limit yourself to stainless?  Normal Sigs are blackened stainless steel. In my experience, glocks hold up well.   I've had a Glock 19 that has been carried by myself or my wife almost continuosly for the last 12 years with little finish wear.  I've put about 3k rounds through it as well.  Mostly now it's in my wifes purse.  
I have a Sig 229 in .40 cal, love it as a carry gun although it is sometimes uncomfortable to conceal.  Also picked up a CZ-75b P01 in 9mm  a few months ago.  Love it.  Fits the same holsters as the sig and glock, pretty much same size but feels better in my hand. and is probably a little slimmer.  Feels as heavy as the Sig 40.
Haven't ever owned  a Kahr, although the ones I've  handled have been slim and felt concealable.  Picked up a sig SP2022 recently in 9, it's the same size as my other guns so familer to carry.
Nice thing about used glocks  and sigs like my .40 and my brand new 2022 is they often come with night sights, the CZ didn't and it was the most expensive of the guns I've bought recently.  
Any of the above would be a good gun in my opinion and range experience.
9/25/2009 6:58:40 PM EDT
[#2]
Quoted:
I'm looking for something very specific.  I want:

*9mm.

*Stainless steel slide and frame.

*Either: Manual thumb safety that sweeps down to the fire position, or no manual safety.  

So far I've identified the pistols below.  Have I missed any?  

Kahr T9

Sig Sauer P229 Stainless Elite

CZ75b Stainless



This would be my choice.

9/25/2009 6:59:32 PM EDT
[#3]
Quoted:
Why limit yourself to stainless?  Normal Sigs are blackened stainless steel. In my experience, glocks hold up well.   I've had a Glock 19 that has been carried by myself or my wife almost continuosly for the last 12 years with little finish wear.  I've put about 3k rounds through it as well.  Mostly now it's in my wifes purse.  
I have a Sig 229 in .40 cal, love it as a carry gun although it is sometimes uncomfortable to conceal.  Also picked up a CZ-75b P01 in 9mm  a few months ago.  Love it.  Fits the same holsters as the sig and glock, pretty much same size but feels better in my hand. and is probably a little slimmer.  Feels as heavy as the Sig 40.
Haven't ever owned  a Kahr, although the ones I've  handled have been slim and felt concealable.  Picked up a sig SP2022 recently in 9, it's the same size as my other guns so familer to carry.
Nice thing about used glocks  and sigs like my .40 and my brand new 2022 is they often come with night sights, the CZ didn't and it was the most expensive of the guns I've bought recently.  
Any of the above would be a good gun in my opinion and range experience.


Excellent points all.  I mostly want a stainless 9mm because I want something puuurty.  I have Glocks, black and parked 1911's, and of course my *black* rifles.  But now I want something shiny that is either concealable or fun at the range.  Either will do.  I don't want a .45 because I'm saving for an Ed Brown Kobra Carry in stainless, so this intermediate step will be in 9mm.  

9/25/2009 7:02:06 PM EDT
[#4]
I have the Sig 229 in .40 and I absolutely love it.  Great shooter, great gun.  Have not shot the 9mm version yet.



Take a look at the Sig P6.  Its relatively cheap, shoots as good as any of my other guns and its easily concealed.
9/25/2009 7:07:50 PM EDT
[#5]
Quoted:
Quoted:
I'm looking for something very specific.  I want:

*9mm.

*Stainless steel slide and frame.

*Either: Manual thumb safety that sweeps down to the fire position, or no manual safety.  

So far I've identified the pistols below.  Have I missed any?  

Kahr T9

Sig Sauer P229 Stainless Elite

CZ75b Stainless



This would be my choice.



Could you elaborate?
9/25/2009 7:21:30 PM EDT
[#6]
For a German handfitted pistol that will shoot better than anything else look at the Allround at about 1300.00 . It will take the SCT grips with slight modify and the 20 round mags
http://www.sigsauer.com/products/ShowCatalogProductDetails.aspx?categoryid=38&productid=261
9/25/2009 7:40:17 PM EDT
[#7]
Where's the fricken poll?
9/25/2009 8:37:23 PM EDT
[#8]
S&W DAO models like the 5946.
9mm 1911s from Dan Wesson, Kimber, and Springfield.

9/25/2009 8:42:03 PM EDT
[#9]
HK USP/USPC.

Check here:

HK USP Stainless
9/25/2009 8:44:48 PM EDT
[#10]
You wouldn't happen to be near San Antonio would you???
9/25/2009 8:48:06 PM EDT
[#11]
Quoted:
HK USP/USPC.

Check here:

HK USP Stainless


He wants a stainless frame, too.
9/25/2009 9:03:42 PM EDT
[#12]
Quoted:
You wouldn't happen to be near San Antonio would you???


If Dallas is near San Antonio, then yes.
9/25/2009 9:05:11 PM EDT
[#13]
Quoted:
S&W DAO models like the 5946.
9mm 1911s from Dan Wesson, Kimber, and Springfield.

http://i241.photobucket.com/albums/ff35/kemays/sa9x19-22208b.jpg


I sencond this
9/25/2009 9:22:04 PM EDT
[#14]
I would get one of the recently imported P228 pistols and have it refinished by CCR.
9/25/2009 9:45:00 PM EDT
[#15]
I love my Glock 17, but if you insist on steel check out the 9mm "Baby Eagle"

http://www.budsgunshop.com/catalog/product_info.php/products_id/13379

9/26/2009 3:00:40 AM EDT
[#16]
I have the Kahr P9.
plastic frame/SS slide.
I really like it and the plastic frame lightens it a bit as it is my carry gun.
You will not be disappointed with Kahr and their customer service is top notch.

Natron
9/26/2009 5:12:13 AM EDT
[#17]
baretta 92 fs, i want one
9/26/2009 5:46:20 AM EDT
[#18]
hard-chrome Hi-Power
9/26/2009 6:01:49 AM EDT
[#19]
If you want a sexy stainless 9mm, there ain't much sexier than a Beretta 92 Inox.  However, that doesn't meet your "safety" style standard.  (Oooh, accidental alliteration - twice!)
9/26/2009 1:08:27 PM EDT
[#20]
SW 5946 has to be the most underated unsung 9mm pistols. It is extremely well made and durable, very reliable and while its DAO, the trigger pull is not long and very smooth and because of its weight it shoots VERY soft. I've seen many 5946's exceed 60,000 rds w/o breakage.

On the negative side is that its the heaviest 9mm pistol made. I carried one for a year and while I'm a fan of the gun its a bit heavy for CCW.

The 229ST is also a very good choice.
9/26/2009 3:22:50 PM EDT
[#21]
P229 Elite stainless, no questions.
9/26/2009 6:00:23 PM EDT
[#22]
Browning Hi-Power
9/26/2009 6:17:24 PM EDT
[#23]
CZ 75b Stainless
9/26/2009 6:24:46 PM EDT
[#24]
Quoted:
Browning Hi-Power


If they made one in all stainless I would have made this decision a long time ago.
9/26/2009 9:09:46 PM EDT
[#25]
Stainless isn't pretty, it's shiny.  Parkerized is puurty.

CZ 75B Stainless
SS 9mm 1911.
9/27/2009 1:25:51 AM EDT
[#26]
Quoted:
Quoted:
Browning Hi-Power


If they made one in all stainless I would have made this decision a long time ago.


What's wrong with the hard chrome model?

9/27/2009 2:46:43 AM EDT
[#27]


Your more than willing to shoot one of my CZ's to see if you like it enough. I'm in the DFW area.