Posted: 4/27/2005 6:59:06 AM EDT
|
For some reason, I have had a bug to get an Anaconda, but I don't know all that much about them. There are a couple of them at local gun shops, one guy has an 8" for only $500, but I know I don't want 8" bbl...looking for 6". Another local dealer has a 6" for 800.00. Why the huge price swings on these pistols??? Do Anacondas have any unique problems that I need to look for when buying one? Can anyone give me some pointers on things to look for when buying Anacondas or Colt revolvers in general? Is it fairly decent to deal with Colt if I need parts/service? Thanks! |
|
The Anaconda is based on the older Colt Trooper Mark III, Mark V, and King Cobra revolvers. As such, it's an absolute TANK. The Anaconda is VERY strong and durable, quite possibly the strongest large frame DA revolver ever built due to Colt's superior forged and heat treated frames and cylinders. The only "problem" with them is, if you dry fire extensively, "some" firing pins "may" be too hard and can break. If you do happen to get a rare case of a broken pin, this is a factory replacement ONLY. Since special tooling is required to change out the pin without risking damage to the frame, only the factory can be trusted. The "fix" is, use snap caps if you plan on dry firing. As for other repairs, you can use Colt or Pittsburgh Handgun Headquarters in Pittsburgh, which was once Colt's warranty repair over-flow site. For parts, you can buy from Colt, Gun Parts Corporation, Brownell's and one or two others. All carry new parts. The Anaconda has the same size grip frame as the Trooper V and the King Cobra, so you can use the various grips that were made for them. Most people who own an Anaconda like it, and have excellent luck with accuracy and shooting. Price swings are due to new or used prices, AND on "scalpers". The Anaconda is out of production until next year, and they have been fairly rare, not often seen in gun shop display cases. Some people simply try to jack the price up, and others sell them used for less. Assuming the $500 gun is used, that might be a great buy DEPENDING on actual condition. The $800 might be in better condition, or due to the more popular barrel length. Like every other uncommon item, prices fluctuate. |
|
Thanks... Both of the Anacondas looked to be in very good to excellent condition. The 6" had a slightly better cylinder lock-up but neither showed abuse of heavy usage. I think the 8" is a great buy but I really want a 6" so I think I'll hold off. Both are being sold by reputable local dealers. |