Posted: 6/22/2014 10:32:54 PM EDT
|
So here is the deal. I want to get a storm lake, kkm, or wilson threaded barrel for my Glock Gen 3 23. I need help figuring out what compensator and what thread pitch they will be. I don't want to spend 275 on the compensator, but don't mind spending that much on the barrel. I would like to mix the barrel/compensator manufacturers. Any previous experience or help is much appreciated. Thanks gents.
He is its future home. 
|
|
I put a Lone Wolf extended barrel and the comp they have for it on a G23 and in caused FT Feeds. They work great on the longer G22 but not on my G23.
Just too much weight on the end of that shorter barrel; it up-set the balance in the operating system. Maybe a stronger recoil system would help I did nothing to try to get it to work yet. |
|
Quoted:
I put a Lone Wolf extended barrel and the comp they have for it on a G23 and in caused FT Feeds. They work great on the longer G22 but not on my G23. Just too much weight on the end of that shorter barrel; it up-set the balance in the operating system. Maybe a stronger recoil system would help I did nothing to try to get it to work yet. You mean weaker not stronger right ? |
|
No I did mean stronger.
The barrel (with or without compensator) would not feed dummy rounds into the camber for function testing before I even went to the range. The longer barrel in the short 23 slide seemed to up-set slide velocity going forward due to the extra force needed to tip the barrel for unlocking. Not enough mass in the slide to drive dummy rounds into chamber. |