Posted: 2/24/2010 6:16:25 PM EDT
|
Anyone have the polymer version of the RAMI? If so, how much use has it seen and how has it been?
This is going to sound like an odd question, but anyone know if a Kadet kit will reliably operate on one? I've seen some people have put them on conventional RAMI frames with good results, despite the fact that the frame doesn't even engage the two front ears of the Kadet. I was wondering if anyone has tried this with the polymer framed RAMI as well. |
|
Quoted:
Anyone have the polymer version of the RAMI? If so, how much use has it seen and how has it been? This is going to sound like an odd question, but anyone know if a Kadet kit will reliably operate on one? I've seen some people have put them on conventional RAMI frames with good results, despite the fact that the frame doesn't even engage the two front ears of the Kadet. I was wondering if anyone has tried this with the polymer framed RAMI as well. That's a good question. Have you asked that at the CZ Fourm? I'm registered there, if you want I can ask. |
| In answer to your first question, I have had mine for about 2 years. Hundreds of rounds down range w/o a single problem. I had the trigger changed out though, I found that the curved trigger stung my finger after about 50 rds. So I sent it off to Matt Mink for a trigger job and replaced the trigger with the 85 Combat trigger. Solved the problem for me. In answer to your second question regarding the kadet kit. It won't work! I tried to have it put on mine, It was originally fitted to my SP01, so before I took the file to it I went to my local gunsmith for his opinion. He said that the Rami P was a different design from the alloy internally and the kadet would not fit. He showed me where the problem was (sorry I can't remember exactly what it was) but it was not a case of additional filing. Needless to say I was quite bummed out about it. |