Posted: 11/4/2005 6:47:43 AM EDT
| can i put the kadet conversion on my cz75 compact? |
|
I have one coming later this week based on the assumption of 'yes'. Far as I know, only the PO1 40, which modded the slide to use the production overrun full-length 40 slides, is the single 75 varient that can not use the Kadet. Some minor fitting to the Kadet may be needed though. Hoping for range report Sun. |
It rocks! The manual shows the 3 spots that may need light filing to fit. For mine, spot C needed nothing, spot A need just a few light file strokes since it fit but only very firmly right out of the box, spot B is intentionally too wide from the factory. B is the very front of the Kadet slide where the rails going into the frame are actually a bit 'V' shaped to snugly anchor the end of the bbl assembly. Light file, test fit, repeat a few times until it fits smoothly when place exactly in the frame. Lubed, loaded 10 rnds of Federal that is under $9 for 550 at Wallyworld, and all ran fine. Try for paper next (attending group event at 50yd line of a windy public range) at find all on paper. Try more carefully and find 7/10 in a 4"h x 6"w cluster about 5" above my poa. I am normally happy to do that indoors at 50ft with a handgun, so I give the Kadet a big happy dance! 
|