Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer

[ARCHIVED THREAD] - EAA Witness Disassembly

Posted: 9/18/2011 9:36:34 PM EDT

So I can't get the slide off of my EAA Witness and I'm wondering if you have any suggestions. I lined up the 2 marking holes and pulled the slide stop out but I can't remove the slide after that. It usually slides right off but I can't seem to get it to move forward at all.

Any help is appreciated.

Posted: 9/19/2011 7:10:35 AM EDT

[#1]

Try it with the hammer down too. I think mine "Sticks" a little when you pull the slide forward also.

Posted: 9/25/2011 5:33:51 PM EDT

[#2]

Hammer cocked is the way I do mine. I have had no problems with sticking.

Posted: 11/4/2011 9:10:08 PM EDT

[#3]

Tried a brass punch and a hammer?
If you clean it more often it wouldnt stick.. lol

Posted: 11/6/2011 10:05:05 AM EDT

[#4]

It looks like your slidestop is broken, in one of your pictures it looks like the pin is still in the frame on the right side. At least on the CZ version, you pull the slide back to where the marks line up, then push the slidestop out from the right side of the frame.

[ARCHIVED THREAD] - EAA Witness Disassembly

Warning

Confirm Action

[ARCHIVED THREAD] - EAA Witness Disassembly

[ARCHIVED THREAD] - EAA Witness Disassembly