Posted: 4/18/2013 6:44:40 PM EDT
| hey, I got a bullet stuck in my USPC, I got the bullet out fine. but there is a line about 3/4 inch on the inside of my barrel from the chamber side. It is a complete circle. I cant remember if that was already there or did the metal get pushed up to form this? please help meeee!! |
|
Are you sure that is not just the front of the chamber that the cartridge case headspaces on? That is what it sounds like to me. Some of the 9mms also have a ring cut in the chamber, around the chamber wall but I do not recall that being used on the USPC. You stick bullets by low pressure, not high, so I am quite certain you did not damage your barrel and you are seeing the front end of the chamber. The only way you damage a firearm from sticking a bullet is by firing another behind in, which results in extremely high pressures. Stuck bullets by themselves do nothing and do not cause damage, unless the owner damages it while removing the stuck bullet.
You are fine, that I am almost certain about. |