AK Sponsor
Posted: 10/4/2006 10:11:16 PM EDT
|
Hey guys. I need some help. I sent the two Romy barrel/receiver peices with the bolt/carrier and recoil assemblies plus two new 1.6mm receivers back to Global Trades to have them put together and refinished. They did a great job but the recoil spring is in peices. I can't find an exploded veiw of the parts to see how this thing goes together. I have looked around this site and the links and can't find any info. Some help would be greatly appreciated. I'm up on AR-15/M16 but have no clue about an AK. Thanks for your time. Scott |
|
I'm sorry but I'm not getting it. There is a loop on the part that would clip into the back end of the receiver and the top cover. There is also a second loop with an open end. There is also a small round clip. There is no way I can put the whole spring down over the single loop with the clip in part. Even if I did the spring would be almost totally compressed. So I guess I don't understand the instrctions. But if I put the spring over the two loops locked together, I can get the little round clip on the open end of the second loop. But the second loop twists and the clip flies off. Any help would be greatly appreciated. Scott |
AK Sponsor