Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
17667 Online
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
AR15.COM
bravocompany
My Account
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
bravocompany
RS
Holosun
skd
cz
DFC
primaryArms
brownells
OSIGHT
silencerShop
JRH
palmetto
vortex
fightlite
colt
magpul
Guns
midwest
geissele
GS
aim
springfield
17667 Online
silencerShop
geissele
brownells
RS
fightlite
JRH
primaryArms
springfield
aim
vortex
colt
Guns
GS
palmetto
cz
skd
bravocompany
DFC
OSIGHT
midwest
Holosun
magpul
AK Sponsor
Site News Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer
1/27/2007 12:25:18 PM EDT
My brother and I were shooting his SKS today and had a malfunction after a couple shots.  When you pull the trigger, it doesn't release the hammer.  I pulled the trigger group out of it and couldn't see anything obviously wrong with it, but I couldn't get it to release the hammer.  The trigger goes through the full range of motion, but it's just not letting the hammer go.

Any ideas what to check?
1/30/2007 8:46:05 PM EDT
[#1]
the trigger group will not go off outside of the gun the gun must be completly assembled with the bolt foreward for the hammer to drop
1/30/2007 10:00:22 PM EDT
[#2]
The bolt follower/disconnector prevents the hammer from falling with the bolt out of battery. If you push this down slightly, it will allow a trigger pull to release the hammer.
BE WARNED... the hammer can really hurt exposed digits in its quick release (don't ask me how I know). Hold the hammer and feel it release.

buckmeister
1/30/2007 10:09:19 PM EDT
[#3]
height=8
Quoted:
The bolt follower/disconnector prevents the hammer from falling with the bolt out of battery. If you push this down slightly, it will allow a trigger pull to release the hammer.
BE WARNED... the hammer can really hurt exposed digits in its quick release (don't ask me how I know). Hold the hammer and feel it release.

buckmeister


you bet your ass it can hurt

i've done it a few times
1/31/2007 8:35:13 PM EDT
[#4]
Are you sure that the bolt was completely closed? The function of the disconnector is to prevent the rifle from firing out of battery.
2/9/2007 4:08:31 AM EDT
[#5]
Sometimes a piece of crap or blown out pimer gets stuck under the sear, it's hard to see when it's in there. I've had it happen, same thing, everything appears ok but the hammer won't drop.  I take the trigger group out and tap on a piece of wood to clear it.
AK Sponsor
colt
CA
ar15com
SAS
palmetto
ar15com
springfield
silencerShop
brownells
cmmg
RS
fightlite
geissele
blackhills
LAPG
gray
primaryArms
THBRD
LAPG
ar15com
Pro2A
bravocompany