AK Sponsor
Posted: 12/14/2003 7:14:21 AM EDT
|
On my Yugo 59/66 sometimes after I load 10 rnds into the rifle with A stripper clip, The first round out of the mag seems to catch on the breach face or the feed ramp or something. It's like the bolt flies home and insead of the round coming "Up and into the breech" it just goes straight forward and rams into the breech face. Do I need to polish the ramp or adjust the feed lips or something? Thanks. |
| It would be hard to tell without looking first hand or knowing what type of amm you are using, but this sounds like a feed lip issue. I have not experienced this myself. Perhaps speaking with a knowledgeable smith in your area. If you are close enough call redstar. They might be able to offer some better advise. |
|
Thanks plateshooter. After I deal with the first round in the mag (Either by guiding it in or discarding it) it runs like A mac truck. I think you might be on to something. I'll have A look at it. No I have never tried to get 11 rounds into the mag...Seems like you could break it by doing that. |
|
Hey plateshooter thank you for the info the problem seems to be fixed now (won't really know untill I get ti to the range.) The Follower was ever so slightly bent to the right, Got it as straight as I could and it as yet to catch up on the 1'st round. Also it is quite easy to get 11 rounds in the mag. Thanks again all. |
AK Sponsor