Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AK Sponsor
12/10/2008 7:01:17 PM EDT
Hey guys.
i was at the range today b;asted through maybe 300 rounds. then suddenly "bang bang nothing" the trigger didn't reset but there was an unfired round in the chamber tried it again same thing. it wont reset the trigger now. I was using wolf.

I've given it a clean hopefully that will fix the problem. but it will be atlest a week before i cn test her out and see if that was the problem. does anyone have anyother ideas as t what may be causing the problem?

the trigger resets when the action is cocked by hand.

Just to recap
it fires the round, ejects the spent casing loads a new round. trigger doesnt reset.
12/10/2008 7:12:19 PM EDT
[#1]
This sounds as if the gun crudded up in the later  round count, to the point that it will not go back far enough to reset the trigger. The hand reset still working and all ??
12/10/2008 9:16:56 PM EDT
[#2]
Sounds like the disconnector is not catching the hammer. You may have a broken or weak disconnector spring. You will have to remove the fcg to find out. Is the rifle stock or has it been converted? If converted, what trigger are you using?
12/11/2008 1:58:12 PM EDT
[#3]
I've since further looked at the rifle and charged the rifle while holding down the trigger. when i release the trigger the hammer catches on the disconector. I am able to manually reset the trigger by pushing on it.

It has been converted but not by me so i am unsure of what trigger etc has been used
I am going to buy some grease today and see if that helps.

I've put atlest 1000 rounds through this gun without a problem until now.
AK Sponsor