Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
3283 Online
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
AR15.COM
bravocompany
My Account
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
geissele
silencerShop
brownells
skd
primaryArms
RS
DFC
Guns
vortex
Holosun
JRH
GS
cz
OSIGHT
palmetto
bravocompany
fightlite
aim
magpul
midwest
colt
springfield
3283 Online
aim
bravocompany
primaryArms
Guns
cz
JRH
silencerShop
brownells
skd
fightlite
RS
colt
springfield
GS
vortex
palmetto
geissele
DFC
midwest
magpul
OSIGHT
Holosun
AK Sponsor
Site News Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer
11/29/2005 9:36:54 PM EDT
Do you guys have any tips on how to get the retainer pin that holds the muzzle break plunger out?  I spent half an hour whacking it with a punch and hammer.

Also, a friend was able to get the retainer pin out of his but once the plunger was installed and the pin pounded  back in place the plunger won't move.  Already filed the plunger with not luck.
12/1/2005 2:45:37 PM EDT
[#1]
Tag
12/1/2005 9:00:05 PM EDT
[#2]
Maybe if I ask a specific question....  does the retainer pin need to be pounded out in a specific direction or does that matter at all?  How much force is this going to take?  I was using a standard hammer but was thinking of picking up a mini sledge hammer.
12/2/2005 10:04:04 PM EDT
[#3]
You might want to try asking your question in the "Build It Yourself" section of this board.
12/3/2005 2:38:04 PM EDT
[#4]
It needs to be knocked out this way:



I used a nail set punch to get mine started.
12/3/2005 3:29:16 PM EDT
[#5]
Quoted:

I used a nail set punch to get mine started.


+ 1 and use a BFH.
AK Sponsor
geissele
fightlite
Faxxon
brownells
silencerShop
CA
bravocompany
ar15com
blackhills
colt
LAPG
THBRD
RS
cmmg
primaryArms
springfield
gray
ar15com
Pro2A
LAPG
palmetto
SAS