[ARCHIVED THREAD] - Is WASR scope mount reliable

Posted: 6/9/2005 7:59:14 PM EDT

Thinking of putting a Kobra red dot , or prolly a scope on my wasr. how reliable is the stock mounting rail???

i saw some milspec ones u can order on freedom optics...or is the stock good enough. i plan on doing some sillohette target practice up to 150 m

Posted: 6/14/2005 9:51:30 AM EDT

[#1]

i have not had a problem with mine. i use the sidrail scopemount and a 4x30 nc star sproting scope. hope this helps

Posted: 6/14/2005 10:31:17 AM EDT

[#2]

After 4 years of heavy abuse, my SAR1's rail loosened but was an easy weld repair.

Posted: 6/14/2005 11:43:25 AM EDT

[#3]

i have a cheap scope on my side mount with 1 inch rings, and i cant even get it to adjust>sp any lower. all my shots are about a foot and a half to low?????? any ideas or opinions. really i probably need a new better scope.

Posted: 6/14/2005 12:46:44 PM EDT

[#4]

I bet the side rail is not parallel to the bore, and your western optic ran out of room to adjust. You can measure to check, try shims, or just get a PSO 4x24.

Posted: 6/15/2005 9:36:29 AM EDT

[#5]

im almost positive your correct. im using a (cheap) Bushnell. iv taken it to the range and attempted to zero it, and it was shooting high, so i began lowering the hairs. i adjusted it as low as it could go but is still shooting high.....very high. also do the PSO zero easily???

[ARCHIVED THREAD] - Is WASR scope mount reliable

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Is WASR scope mount reliable

[ARCHIVED THREAD] - Is WASR scope mount reliable