[ARCHIVED THREAD] - Stock Problem

Posted: 6/27/2004 10:26:21 PM EDT

I took my AK (wood stocked) out the other day and i had a seriouse problem with the stock bolts lostening up on me. I could tighen them down just fine, but they would come loose again after 1 or 2 mags. I could actualy see the screw rotate as i fired.

I am thinking that loctite would solve this problem...but im not sure loctite would work with a wood stock. Thanks in advance.

Posted: 6/28/2004 5:11:45 AM EDT

[#1]

I guess your taling the screws that goes into the stock from the rear trunion? I would put some Elmers glue or a Wood glue in the screw hole and screw her down and let dry. I think it would hold. WarDawg

Posted: 6/28/2004 9:14:38 AM EDT

[#2]

yup, good ole wood glue should do it

Posted: 6/28/2004 7:37:14 PM EDT

[#3]

If the wood glue alone doesn't work try it with toothpicks broken off to be a little shorter than the hole is deep.

[ARCHIVED THREAD] - Stock Problem

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Stock Problem

[ARCHIVED THREAD] - Stock Problem