AK Sponsor
Posted: 1/28/2010 4:17:41 PM EDT
| I have been trying to push the magazine catch spring and have the magazine catch aligned to put the bolt in but it just seems impossible to do. I am sure there is an easier way but I am just not seeing it. Any ideas or a video that you think might help? |
| I did but it does not say anything about the assembly of it. What I am trying to figure out is a practical way to put the mag catch spring and the mag catch together. I took it apart because the ping that olds the spring and mag catch together was separating after every load and it was getting annoying to align it every time. |
|
not an easy feat at all. I think they must assemble them before they rivet them to the rifle, n/c when not on the rifle, it's relatively easy to do. The last time I did it, it took me 2 springs and about 3 hours of grumbling before I got it. If you can find a small pair of spring compressing pliers, that would be your best bet. |
|
duckbill pliers. grind like this:
http://www.arizonaresponsesystems.com/notes/notestools/toolsddrak/pagetoolsddrak.shtml#anchor8 |
AK Sponsor