AK Sponsor
| I would not worry about it. A little rattle is ok. My spare gas tube for my vector u/f was tight as a rock when I put it on, after a day of shooting it is a little loose also. Believe me, I know how people are with their rifles and if it bugs you now you and you NEED to fixed kvar has the gas tube retainer springs. Look like a hollowed out pringle potato chip. I think they are under $2 a piece. Fits over the back of the gas tube and that should clean up any wobble. Sometimes they need a little fitting to get on, and be aware it then could be a pita to get your tube off, but it won't wobble. |
|
If that bit of looseness begins to bother you.... Get a plastic wire tie. Cut off a small chunk, and drop it into the lower cutout on the Rear Sight block. Put your gas tube back - notice how tight it is? Now - next time you clean? This will likely fall out. No problem... cut off another chunk of plastic wire tie :) |
+1. That works great. The only thing you have to worry about is your wife asking why we have 10 trash bags left and no ties. |
AK Sponsor