AK Sponsor
Posted: 12/10/2006 4:03:33 PM EDT
|
I just got a AMD65 and the chamber/barrel is very tight I was using wolf steel cased ammo and it either will not load or will not eject the case (because it is stuck in the chamber/barrel) is this because of the cheap ass wolf ammo (it ran fine in my yugo m70) or is the hungerian chambers tight? It was built by century and everything looked brand new on it Thanks for any help |
|
Get a light and look for burrs in the chamber woudl be the first thing I would do (right after a GOOD initial cleaning if you haven't already done that). Inspect the brass, er steel, after it is fired- any noticeable gouges or scrapes on it or strange deformations (there probably will be a dent on the lip of the casee- that is pretty normal with AK's). It might give you a clue what it is hanging up on. There also is always the million to one shot that when they test fired it (if they do such a thing) that some otf the last casing got stuck in there, or that one of the rounds you fired had part of a rim tear off and get stuck in there. Any 7.62x39 inlcuding Wolf should run through your gun. If you continue to have issues, call Century and get it returned/repaired under warranty. |
AK Sponsor