AK Sponsor
Posted: 6/20/2004 5:46:20 PM EDT
|
hello i have an sar 1 with amd 63 furniture and when i am tring to bump fire it some times the fireing pin just barely touches the primer and the shell dosent go off this happens rather often even when rapid fireing. I tried a new bolt and bolt carrer but it still does it. This can be rather flusterateing any of you guys out there know what i am talking about or have had this happen to them???? I have also replaced the fire control group |
|
What kind of fire control group? It may be improperly configured. I had a similar problem after I midifed the stock FCG in my SAR (since replaced) to lighten the trigger pull. The hammer wasn't locking back well enough and it was following the bolt, resulting in light primer strikes. |
| the new fire control group was romainian. I beleave or it was susposed to be who knows???? I bought it from e bay...... I also have a new fcg that came with my amd 63 i may try but i really dont think It will help..... I have already had two fcg's in the gun. the original from centery arms and the romainan one. ( I am now banging my head on the computer) this is boggleing my mind.hinking.gif |
|
For a SAR-1 with a pistol grip you will need a US-made FCG to be legal with 922r. Get the G2 group as suggested if you want to keep from spending a lot, otherwise the RSA FCG is excellent for a bit more. I would bet the problem would go away if you put a G2 in there. |
AK Sponsor