AK Sponsor
Posted: 10/11/2012 6:21:13 PM EDT
|
I'm on the hunt for a stock for my MAK, and wanted to make sure my tang is/isn't longer than a standard Ak. Can you guys give me some measurements from the rear of the receiver, to the rear of the tang. Any help is greatly appreciated.
::edit:: if you don't mind could it be in inches, and please list what type of AK it is. |
|
Quoted:
The tang is the normal size, but I believe you would also want to check the spacing between the 2 holes on the tang. GARY VLTOR claims their stock adapter will fit my MAK, but CAA says their aluminum model will not. CAA does have a polymer one I'm sure I could make work, even if the tang is different. |
| Chinese stocks are about 2mm longer than the euro. versions. You'll also have to shave down the stock a bit where it fits into the receiver since the chinese receiver is 1.5mm thick instead of the euro. pattern 1mm receiver. Just off the top of my head info, sorry I don't have it in inches since I keep AK info in metric since that what was used to build them. |
AK Sponsor