[ARCHIVED THREAD] - Tapco G2 trigger mods?

Posted: 7/20/2012 8:02:57 PM EDT

I am wondering if the trigger pull length can be safely reduced at all by modifying a stock Tapco G2 trigger? If so, does anyone have any instructions?

Posted: 7/20/2012 8:28:10 PM EDT

[#1]

www.arizonaresponsesytems.com

In the notes section, ak trigger work

Posted: 7/20/2012 9:56:19 PM EDT

[#2]

If it aint broke don't fix it.

Posted: 7/21/2012 7:16:15 AM EDT

[#3]

Not worth the effort. Probably need to drill and tap and install screws. I would just get a Red Star trigger if you want something adjustable.

Posted: 7/21/2012 12:16:30 PM EDT

[#4]

Quoted:
If it aint broke don't fix it.

ding

Posted: 7/21/2012 2:39:06 PM EDT

[#5]

I think they are nice as is... hard to complain.. could be worse for sure. And they are cheap... whats not to like?

Posted: 7/21/2012 2:59:38 PM EDT

[#6]

Just because they are cheap and work doesn't mean they can't be easily improved. If you can make them better without spending money... why not? I polished the hell out of mine, made a huge difference. My next build I'll put even more work into it. It's free and makes a big difference.

Posted: 7/29/2012 1:46:44 PM EDT

[#7]

Well I should have just installed the trigger first before making this thread. The G2 is just fine the way it is. I thought it would be too heavy but I was wrong!

Posted: 7/30/2012 1:24:59 AM EDT

[#8]

I find the G2 pretty damn light as is, one of the few things Tapco got right.

Posted: 7/30/2012 2:48:58 AM EDT

[#9]

the G2 hammer in my draco gets hung up on the bolt not allowing it to return forward(without putting forward pressure on the CH), only happens when I slowly charge it though.so it doesn't bother me enough to do any polishing

Posted: 7/30/2012 5:23:46 AM EDT

[#10]

Quoted:
the G2 hammer in my draco gets hung up on the bolt not allowing it to return forward(without putting forward pressure on the CH), only happens when I slowly charge it though.so it doesn't bother me enough to do any polishing

Common. Just drop it like its hot.

Posted: 7/30/2012 6:32:13 AM EDT

[#11]

Quoted:

Quoted:

the G2 hammer in my draco gets hung up on the bolt not allowing it to return forward(without putting forward pressure on the CH), only happens when I slowly charge it though.so it doesn't bother me enough to do any polishing

Common. Just drop it like its hot.

Yup. Yank back on the charging handle and then let the carrier slam home.

[ARCHIVED THREAD] - Tapco G2 trigger mods?

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Tapco G2 trigger mods?

[ARCHIVED THREAD] - Tapco G2 trigger mods?