AK Sponsor
Posted: 2/21/2011 9:31:52 PM EDT
|
http://img827.imageshack.us/img827/7483/055qs.jpg
http://img193.imageshack.us/img193/9907/054uwv.jpg http://img210.imageshack.us/img210/230/056bd.jpg The second video has a FAIL. What happined was I did not clean all of the grease out of the inside of it before the test, sand and dirt got in the chamber and when it fired it jammed tight and ripped the lip of the casing off. BTW, a ak cleaning rod is to short to tap a stuck round from the chamber.....I eneded up getting a small "sample" snap on screw driver from another shooter. Long story short after 20 minutes of modding it I used it, the cleaning rod, and a rock to knock the stuck caseing out of the chamber. http://www.youtube.com/watch?v=Ejfe_J0kBNQ http://www.youtube.com/watch?v=91OFlJ2HUF0 So after we cleared the stuck caseing we cleaned it the traditional way to remove the grit from the chamber. http://www.youtube.com/watch?v=xsVPlVIKdco I guess I should have waited till it dried to fire it. http://www.youtube.com/watch?v=rn6F6ywVxYo |
|
OP, I found another one of your videos.
http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one? 
|
|
Quoted: OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one? |
|
Quoted:
OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one? OMG! 
|
|
Quoted:
OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one? Oh Dear God! As for the first post.... You have an AK, with minor surface rust, it fails to fire without a proper cleaning and inspection. And we are supposed to be surprised? |
|
Quoted:
Quoted:
OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one?
Oh, my.......
|
|
Quoted:
so you took a wasr and stripped the wood, sanded the metal parts down and threw it into a sand pit... and that's your torture test? Apparently he never cleaned the preservative ("... grease...") out of the rifle to give the sand something to stick to.
Some people will do anything in their quest for youtube "fame and fortune". |
|
Quoted:
Quoted:
Quoted:
OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one?
Oh, my....... |
|
Quoted:
oh my x11ventybillion
so you took a wasr and stripped the wood, sanded the metal parts down and threw it into a sand pit... and that's your torture test? 
He may have put them there him self, but in the pics it shows it has dimples. Which the WASR does not ETA: and to be fair, he did pee on it. Thats torture enough! At least to watch
|
|
http://www.youtube.com/watch?v=91OFlJ2HUF0 "What da hell are ya'll doin?" at 00:30. |
|
It's someones failed project I picked up on another forum for $115 shipped, it was a butchered rusty mess with a messed up barrel. I basically bought the reciever and recieved a rough parts kit for free. I bought another parts kit just for the barrel/bolt that were already pressed and head spaced. I've basically got a spare parts kit from the left over parts of the two kits, I MAY build it I may sell it, not sure yet........ All in all if I sell the left over parts I'll have roughly $180 in the rifle.
I've got some pretty expensive firearms so trying to belittle me for one weld build really dont bother me one bit, this project was dirt cheap and took something that took 30 minutes to weld and gave me a couple days of entertainment..... I'm going to abuse it until it breaks/blows up and then I'm going to demill it via my m2hb with some mk211 rounds. The guy in the shorts is a friend of mine, the shorts is a running inside joke on another forum were on. Some time last year he lost a bet and had to drive his motorcycle through the city wearing this. I took the pics and posted them online, we had taken our bikes to the range that day and once everyone left he found them in his ammo boxes so he got in to the shorts to make those videos for the other forum 
http://img339.imageshack.us/img339/4167/093hp.jpg |
|
Quoted: Quoted: Quoted: Quoted: OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one? Oh, my....... I knew I should never have clicked on that link. There is no way to unsee that... |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
OP, I found another one of your videos. http://www.youtube.com/watch?v=HIMWPeD3eZY What in the fuck is going on in that one?
Oh, my....... I knew I should never have clicked on that link. There is no way to unsee that... The question, "What the fuck?" will not explain this... |
|
Quoted: You're "buddy" is one gay looking character.It's someones failed project I picked up on another forum for $115 shipped, it was a butchered rusty mess with a messed up barrel. I basically bought the reciever and recieved a rough parts kit for free. I bought another parts kit just for the barrel/bolt that were already pressed and head spaced. I've basically got a spare parts kit from the left over parts of the two kits, I MAY build it I may sell it, not sure yet........ All in all if I sell the left over parts I'll have roughly $180 in the rifle. I've got some pretty expensive firearms so trying to belittle me for one weld build really dont bother me one bit, this project was dirt cheap and took something that took 30 minutes to weld and gave me a couple days of entertainment..... I'm going to abuse it until it breaks/blows up and then I'm going to demill it via my m2hb with some mk211 rounds. The guy in the shorts is a friend of mine, the shorts is a running inside joke on another forum were on. Some time last year he lost a bet and had to drive his motorcycle through the city wearing this. I took the pics and posted them online, we had taken our bikes to the range that day and once everyone left he found them in his ammo boxes so he got in to the shorts to make those videos for the other forum http://img339.imageshack.us/img339/4167/093hp.jpg |
AK Sponsor