AK Sponsor
Posted: 1/13/2008 10:06:32 AM EDT
|
Hello All, Can you add a sidefolder, like a triangular "Kyber" type stock onto a standard stocked Arsenal rifle? T |
|
That kind of folder requires modification to the receiver and installation of folding hardware, so yes you can, but it will require a gunsmith job to get it installed. There are non folding versions that fit into the stamped receiver like any other stock though, so they will look the same but they just won't fold. Then there are folding versions for stamped receivers that have all the mounting hardware on the 'outside', that is it pivots further back than if it were installed internally. Also, Romanian wire folders fit into the stamped receivers without modification and do actually fold. Z |
|
In order to do that you must permantly modify the reciver. Cheap way would be to buy a parts kit and a Nodak reciver already cut for the side folder. Or dismantle yours and sell of the remaining receiver providing it is undamaged other than the remaining rivet holes and then buy the Nodak reciver... There will still be minor fitting issues but if you can build an AK It should be reletivly easy.. Edit.. The Firing Line in Oklahoma does sell milled recivers already modified but alittle pricy compared to a cheap to produce stamped reciver. Look..Not a Rick Roll |
That's really too much work to do on a milled receiver. I'm not saying it's not possible but it's entirely impractical. For the money you'd pay to do something like that, your better off just buying a milled receiver that's already cut for a folding stock and the hardware. www.firinglineoklahoma.com/akreceivers.html |
AK Sponsor