AK Sponsor
Posted: 3/13/2010 4:33:25 AM EDT
|
I want to see your rifles with the Primary Arms Microdot. I know allot of the rifles will look similar but I just want to see how yall are running them with everthing else. Also if you found any issues with certain setups or models please feel free to elaborate. I think i read that the gen 2 and 3 wont allow use of the irons atleast in their normal position but would REALLY like to be wrong on that. If you have any shots looking through it how your eye sees it please post them. What i mean by how your eys sees it is get the distance back from it right so it looks as if it was your eye looking through it and not a camera. Think pareferal vision. Thanks and cant wait to see what yall have. |
|
I'll try and get some pics up later, the camera is in the wife's car right now and a phone or webcam will be too fuzzy.
As for irons, I can just see them at the 300 meter setting, 100 and 200 are too low. I figure that I can engage targets with the 300 meter setting until I have time to get the sight off, if I'm ever in that sort of (very unlikely) situation. I'm running an SLR-107F with the non-vented Ultimak. |
|
Quoted:
Thats a PWS FSC-47 on the rifle above. I have one on mine as well. Nice looking rifle and how do you like the light mounted like that? Yep that's a FSC47. I really like the offset vltor mount. I think the light works a lot better on the ultimak than on a side rail attached to a hand guard like the CAA LHV. Puts the light right were I need it to be and doesn't get in the way as much. |
SAR-2 Primary Arms Gen 1 microdot - latest batch Ultimak with barrel shims for light barrels Vltor offset light mount Fenix TK11 R2 light The PA micro dot is great and gives me perfect 1/3 co-witness. Very nice crisp dot. Very high quality. I really like this setup although I think I may get a lighter weight light. The TK11 makes it a little front heavy even with the light barrel. I'll probably replace it with a surefire G2 or fenix PD30 if I can find a way to mount it to the VLTOR mount. I think electrical tape might melt from the heat. |
|
Quoted:
What is the difference between Generations? I noticed the above poster said Gen1, just got it today. Wouldn't later Gen's be better? Gen 2 has a removable base so you can use taller mounts for use on an AR. It has the adjustment dial on the side. It won't cowitness on an AK. You may be able to see the tip of the post if you are lucky. Gen 1 will cowitness on an AK because it sits lower. Has the adjustment dial on the top. And I think it gets a little better battery life. |
|
Quoted:
Quoted:
What is the difference between Generations? I noticed the above poster said Gen1, just got it today. Wouldn't later Gen's be better? Gen 2 has a removable base so you can use taller mounts for use on an AR. It has the adjustment dial on the side. It won't cowitness on an AK. You may be able to see the tip of the post if you are lucky. Gen 1 will cowitness on an AK because it sits lower. Has the adjustment dial on the top. And I think it gets a little better battery life. Ahhh, excellent. Thanks for the info. |
|
Here's my Draco with a cut-to-fit Untimak M1-B and a PA Micro Gen 1. Fantastic setup, and I've not had any problems with heat and the Micro... burned my fingers a few times though!
http://i275.photobucket.com/albums/jj307/mammynun/weapon%20stuff/P3182373.jpg http://i275.photobucket.com/albums/jj307/mammynun/weapon%20stuff/P3182374.jpg http://i275.photobucket.com/albums/jj307/mammynun/weapon%20stuff/P3182377.jpg |
| Reading this thread really makes me want to get the Primary Arms micro dot (Gen 1) & Ultimak combo. I have a WASR and my gas tub doesn’t have vents. It looks like Primary Arms is sold out of the Ultimak without the vent holes. Should I just wait until they get it back in stock or should I get the Ultimak with vents? I read that shouldn’t have any ill effects on my AK. What do you guys thing? Thanks. |
|
Quoted:
Reading this thread really makes me want to get the Primary Arms micro dot (Gen 1) & Ultimak combo. I have a WASR and my gas tub doesn’t have vents. It looks like Primary Arms is sold out of the Ultimak without the vent holes. Should I just wait until they get it back in stock or should I get the Ultimak with vents? I read that shouldn’t have any ill effects on my AK. What do you guys thing? Thanks. It is just conmetic but we have a order of the M-1Bs on the way. UPS tracking sjows delivery on Wednesday the 14th. Marshall |
|
Quoted:
How does that BP work out for you with the Gen2? I cant get mine to zero to save my life. I maxed out that height on the gen2 and even have the BP tilted down. seeing that this is my first time with a AK/Red dot set up it took around 20 shots to get on paper. i didn't bore sight it before going to the range so maybe that had something to do, it was shooting way to the left and a bit low, so after 30clicks to the right and 5 up i was pretty much dead on. try moving your red dot forward or rearward and see what happens. now when you say tilted down what do you mean by that? |
| It was shooting WAY low, so I had to tilt the mount down (put washers under the rear screw on the mount) and still its shooting WAY low. Its about 6-8" low at 50 yards with the Gen2 maxed out on height. I have mine mounted back further on the mount, by the rear screw. |
|
Quoted:
Quoted:
Quoted:
It is just conmetic but we have a order of the M-1Bs on the way. UPS tracking sjows delivery on Wednesday the 14th. Marshall Thanks for the info Marshall. I'll wait until you get the new shipment in. 
M-1Bs back in stock!!! Thanks for the heads up. One small issue thought, when I add the Ultimak M1-B it's not adding the discounted cost. I would love to receive the mount for free  but I'm an honest person. Once the issue has been corrected I'll place my order.
|
|
Quoted:
Thanks for the heads up. One small issue thought, when I add the Ultimak M1-B it's not adding the discounted cost. I would love to receive the mount for free but I'm an honest person. Once the issue has been corrected I'll place my order.
 Crap!!
I just fixed it. Thanks!!! |
|
Quoted: Quoted: Crap!!I just fixed it. Thanks!!! No problem. Order placed. I do have a question for those with red dot already, how do you sight in your red dot? Do you co-witness and put the dot right on top of the front post? Thanks. I haven't had a chance to shoot it yet because I just got it last week, but I just co-witnessed mine. I have a Gen 1. |
|
Quoted:
Quoted:
Crap!!
I just fixed it. Thanks!!! No problem. Order placed.
I do have a question for those with red dot already, how do you sight in your red dot? Do you co-witness and put the dot right on top of the front post? Thanks. If your irons are zeroed then yes. Just line up the irons and adjust the dot to sit on top of the front post. |
|
My WASR 10/63 with an Ultimak and Primary Arms gen1 Microdot
http://i431.photobucket.com/albums/qq31/eb_311/IMG_2836.jpg?t=1271303169 http://i431.photobucket.com/albums/qq31/eb_311/IMG_2826.jpg?t=1271302934 |
|
I would like to thank Marshall from PrimaryArms for the super fast shipping and great product.
http://img638.imageshack.us/img638/2605/reddot1.jpg http://img63.imageshack.us/img63/3994/reddot3.jpg |
|
Quoted:
For those who use this setup, how does this sight hold up on the Ultimak? I only ask because I burned up the first optic I had on my Ultimak. You won't have a heat problem, in semi auto. We have never tested full auto. We also did a frying pan test when this first came up almost a year ago to be sure. Marshall |
|
Quoted:
For those who use this setup, how does this sight hold up on the Ultimak? I only ask because I burned up the first optic I had on my Ultimak. I've got the Primary Arms Micro Gen 1 on an Ultimak; 2k+ rounds with no issues. It even returns to zero when I remove the Ultimak for cleaning after shooting corrosive ammo. |
|
WOW!!! That's Nice. |
|
Who makes the rail that the T-1 is sitting on? |
|
Quoted:
Who makes the rail that the T-1 is sitting on? I got the rail from NDS, but I don't think they made it. It's very similar to the Stormwerz rail for the Russian Krinks. I have been very happy with the performance of the M-92 with the T-1 Aimpoint. Here is a very rapid fire test target from 50 yards, prone, forearm resting on range bag. 
Remember you guys, I won this Krink in the ar15.com member's raffle! |
|
What Ultimak is that? |
|
Quoted:
Here's mine, ok it's not an PA micro but i'll show it off anyway Arsenal 107F, UltiMak, Aimpoint T-1.
http://i139.photobucket.com/albums/q281/nframe357/finishedarsenalR.jpg What pack and drop pouch is that? |
AK Sponsor