AK Sponsor
Posted: 1/28/2005 10:06:18 AM EDT
| My drum is not feeding the next round up fast enough. Let me explain if it doesn't make sence. Often times my bolt goes forward and there is no round in the chamber. I pull the bolt back and then a round goes in the chamber. Meaning my drum is getting stuck or is just not cycling fas enough. Is there a quick fix to this problem? Thanks in advance for your help! |
|
I would take it apart, degreese all the internals and oil lightly with rem oil. when putting it back together make sure you wind the spring up tight enough. I seem to recall it being 4 complete rotations. Somebody here might know exactly. I dont have a drum handy, but it is not complicated at all. I didnt have directions and I figured it out. If you have an IQ over 90 and a basic understanding of mechanics you could figure it out too. If I had a Digi cam I would post pics for you. If nobody else does, I will try to get my hands on a digi cam and post you some pics within a week. |
|
first thing i did with my romanian drum was tear it apart and clean everything! when i took it apart it had 5 winds. when i put it back together i decided it did not need any more than 3. thing works perfect. if you dont know you take it apart by pushing in the middle of the little thumb screw then it unlocks it and allows it to turn. does not need to turn much just turn then pull off. mind took a bit of work before it would give but now that i cleaned it comes off with out a problem. i also removed the sharp corners on the bullet rails. |
AK Sponsor