AK Sponsor
Posted: 8/21/2007 4:54:28 PM EDT
|
HI THERE I BUILT A ROMy G PISTOL KIT, IT STILL HAS THE ROMY FCG IN IT, I MADE IT SO ITS SEMI AUTO, ANYWAY, WHEN I FIRE IT , THE HAMMER GOES BACK AND GETS CAUGHT UP ON THE DISCONNECTOR, IT CAUSES THE TRIGGER TO STICK, I HAVE TO NUDGE THE TRIGGER FOWARD A HAIR, THEN ITS FINE, SHOULD I FILE THE HAMMER DOWN A HAIR OR WHAT? yes its ok to use non usa parts in a pistol build 
|
its funny when people get PO'ed about the caps lock, it has nothing to do with the question, if anyone has intelligent answers--then please help  |
I own an AK, and have build a few. I know what i am talking about. Apparently you are a bit confused. A sear is only present in a full auto AK. What i beleive you are referring to is a disconnector. Completely different part. I would recommend removing and reinstalling the FCG parts. Also, what kind of receiver is this? It is possible the holes are off, so that they are a hair too close together. This would cause the hammer to bump the disconnector. |
Oh thats a way to ge thelp 
|
|
Apparently Misfit likes to extensively edit his posts. If he would read the posts in order, he would notice that I suggested just shooting the gun, the problem would work itself out. I already gave my suggestion a few posts before he asked what I would do. I think Misfit misinterpreted the original post. The problem isn't that the bolt carrier is hanging up on the hammer (which his suggestion might fix), the problem is that the trigger doesn't reset. In which case, just shooting the gun more will fix the problem. Again, simple reading comprehension. BTW it's 'slew', not 'slou' |
|
|
ok- ill end it here cause it will just go on forever and before this turns into a middle school verbal brawl that will acomplish nothing but high blood pressure for you. ill let everyone know that its fixed, shoots great after i fiddled with it, thanks to all who had helpful replies. i dont know what fixed it, but shes running smoothly  
|
AK Sponsor