Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/17/2006 10:23:48 AM EDT
I threaded my Romanian postban SAR-1 barrel and now need to install the pin that holds the brake. What do I buy, where do I buy it and how do I do it. I don't have a clue on what I need to do. Thanks.
Link Posted: 1/17/2006 1:32:45 PM EDT
[Last Edit: 1/17/2006 3:53:25 PM EDT by Soldier48]
I just had mine installed on my SAR-1 also.


Also this website has great info.
http://www.gunsnet.net/Linx310/threadinstall.htm

The only difference is your barrel is already threaded so you would just have to drive out the fron pin on your front site post, then install your spring then your retainer sping. Then that pin you pulled out can go back in (This will hold your retainer pin from coming out). Then your muzzle retainer pin should be able to move in and out with the spring keeping it pushed out. Holding your muzzle brake on.

If someone else can explain this better please chime in....
Top Top